Alice booklets slip-up
When ISP moved to new premises at Wolverhampton they were able to use their new Cerutti press for the Alice in Wonderland retail booklet. Hopefully this will improve quality and reduce the registration errors that have been a feature of booklets over the last few years.
However, the early signs are not too good. These two booklets were received in Holland from Royal Mail's Edinburgh Bureau, and as well as illustrating a nice miscut, they also pose some questions.
As you can see (click on the image to enlarge), the lower (miscut) booklet is missing part of the caption on the leading edge, and the magenta cylinder number is tight up to the edge.
As our correspondent wrote:
Note on top the trimline between books and also the outer ellipse at
the right edge which has the same height as normal books. So this must be done after
the books are trimmed from the large printing rolls.
However, even that situation is not as straightforward as it seems as these pictures show.
Firstly, the two booklets lined up so that the Alice stamps are in the same place.
Then, the booklets lined up as cut - in which the two cut-outs are close to being in the same place. Lastly lined up so that the trim-line is level with the top of the correctly cut booklet. Neither of these shows the cut-out in the same place, which suggests that some of the height is removed in the cutting process.
Good luck to ISP, it will be interesting to see how they get on with other similar booklets.
UPDATE from somebody who has been to the new factory:
I don't think this type of
error can be laid at the foot of the Cerutti printing press.
The press prints both side of the web in one operation and
then rereels it back into a jumbo roll. This is a high speed process. The operational web width is 800mm; with booklets being about 170mm one can get four columns (the Chesnut was two columns). The web isprobably slit into two working rolls on press. These jumbo rolls will thenbe put into store.
Subsequently, a working reel will be mounted onto the next machine (a
slower speed process) that will do the die cutting; draw off the stamp
matrix and then sheet the web into gangs of six or eight. Its only at this point in
the production cycle cutting of the web occurs or further on. This part of the operation probably hasn't changed from the old site.
The final phase will be to take the gangs and guillotine them into
booklet form; fold them and pack them.
Old Birds Hang Out in Grimsby
When the Post and Go machines were affected by the
March 2014 tariff change we published (and added to) details of the various sets which had been found around the country. This included Birds 2 at Grimsby, stamps which were bought in early April.
At the time, and even last week when our round-up of the year was published, Birds 1 hadn't been found with the 60g values. Issued in September 2010, to only a small number of offices, surely they must all have been used? Well apparently not, as this set was also bought in early April 2014 and is currently available
on eBay from seller 12pea. Available for (up to) 30 days - yours for only £1,250.
Thanks to the people who told me about this.
UPDATE: At the York Stamp Fair I was shown 60g values from Harrogate. The date of production was not available.
Short-term error 'missing BPMA'
Sadly not on the stamps themselves but on the receipt. This error occurred on 29 December and we think it was probably corrected quite quickly (I haven't seen any on eBay!). The difference to the receipts results from the software change (machine reset) after the Winter Greenery issue was taken off sale.
But I notice also poor (or non-)wrapping of the details, on the earlier receipts with the description overrunning the quantity.
Thanks to Malcolm for what is probably quite a scarce error - and he didn't notice it until he got home!
Wincor Nixdorf machine issues
Machin Head increased from 6 to 9 values (3 values)
Birds 1 No known change
Birds 2 increased from 36 to 48 values (12 values)
Birds3 increased from 36 to 48 values (12 values)
Birds 4 increased from 36 to 48 values (12 values)
Sheep increased from 36 to 54 values (18 values)
Pigs increased from 36 to 54 values (18 values)
Cattle increased from 36 to 54 values (18 values)
Union Flag increased from 6 to 9 values (3 values)
Robin MA12 reprint increased from 6 to 9 values (3 values)
Lakes increased from 36 to 54 values (18 values)
Ponds increased from 36 to 54 values (18 values)
Rivers increased from 36 to 54 values (18 values)
Machin Head MA13 reprint increased from 6 to 9 values (3 values)
Union Flag MA13 reprint increased from 6 to 9 values (seen on eBay, issued by Harrogate)
Robin MA13 reprint increased from 6 to 8 values (2 values)
Spring Blooms increased from 36 to 54 values (18 values)
Symbolic Flowers increased from 36 to 42 values (6 values)
Poppy (solo stamp) 7 values
Winter Greenery (1st class) 12 values
Winter Greenery (2nd class) 12 values (issued in error by Farringdon Road and Perth)
NCR (NVI values only) not including class swap rolls*
Machin (1st class) 9 values
Machin MA13 reprint (1st class) 9 values
Machin MA14 reprint (1st class) 6 values
Machin MA12 (2nd class) 2 values
Machin MA13 reprint (2nd class) 2 values
Machin MA14 reprint (2nd class) 2 values (Two part centre band)
Machin MA14 reprint (2nd class) 2 values (Full Centre band)
Union Flag 7 values
Robin MA13 reprint 6 values
Spring Blooms 42 values
Symbolic Flowers 36 values
Poppy (solo stamp) 6 values
Winter Greenery (1st class) 12 values
Winter Greenery (2nd class) 4 values
And then there’s the exhibition/static machine issues